Filter

Category

Complete lines

Sold - Crabtree Marquess single colour printing line with UV-oven
Quality used 1-color type Marquess 4538 printing press with Dahlgren dampening system. Spanish origin UV-oven is from 2004 and in the same year the control system is renewed to Omron. more info
Sold - Crabtree Marquess 36" two colour printing presses
Used Crabtree Marquess 2-colour ( also referred to as: tandem or double ) printing presses A and B deck and sheet feeding unit. more info
Sold - Littell BR3E coil cutting line
Cut-to-length line includes: Coil Car, Coil Unwinder, Leveller (straightener), mirror inspection, EDS pinhole detector, shear, 4 stacking boxes (pilers). All units are synchronised with shear speed. Max gross weight Mandrel is 12,5 Ton. Coil internal diameter is 360 - 444 mm and max outer diameter is 1828 mm. Min coil width is 700 mm. more info
Sold - Crabtree Marquess 4036 two colour printing presses
Used Crabtree Marquess 2-colour ( also referred to as: tandem or double ) printing presses A and B deck. This offset printing machine is in good condition and until very recently employed by a United Kingdom factory. The Marquess presses are equipped with Dahlgren dampening systems. more info
Sold - Littell LM1E coil cutting line
Cut-to-length line includes: Coil Car, Coil Unwinder, Leveller (straightener), mirror inspection, EDS pinhole detector, shear, 4 stacking boxes (pilers). All units are synchronised with shear speed. Max gross weight Mandrel is 12,5 Ton. Coil internal diameter is 360 - 444 mm and max outer diameter is 1828 mm. Min coil width is 732 mm. more info
Sold - Steel drum manufactering line of 60/70 Liter drums
This used drum making line includes an automatized Schuler 100 tons press and tooling for the ends. The drums are made in black plate thickness 0,5 mm for dangerous goods. It is possible to produce just cylindrical drums of 40 and 110 liter as well. During production three operators are needed, one for the welder, one for seaming and one at the back-end of the line. Regarding the Schuler press this is atomized with a hydraulic lifting table in front to put the sheet on a pneumatic feeding system which picks up one sheet and gives it through a roller lubrification system to the sheet pusher, which conveys the sheet step by step under the stamping tool. Each stamped end is pushed out to backside mounted conveyors and a stacking unit, the sheet waste is pushed away by a roller system. Hence the press is able to work without permanent operator. more info
Sold - Soudronic 20 Liter rectangular line for chemical cans
Complete used can making line with Soudronic bodywelder model VEA 25 TE. Expander is from Biagosch & Brandau, Klinghammer SBA 300 flanger and two Japanese seaming machines for bottoms and lids from Yaguchi Iron Works Co. Refurbished before delivery. more info
Sold - Mailander 466 coating line with LTG tunnel-oven
Mailander feeder type is 770. Drying tunnel-oven entry with dynamic sheet brake system. Length of the oven is 30 meter and has 2 heating zones. Zone 1 is heated by thermic post-combustion incinerator and zone 2 by a seperate burner. Also installed wicket pre-heating and stainless steel washer cabin. more info
Sold - Crabtree 1200 tandem printing line with Mailander 431 in-line spot coater
Presses equipped with Envetron dampening system; LTG tunnel-oven has 24 meter heating zone more info
1 2